Samsung Galaxy
S II
Remove
rear casing and battery.
Remove SD card and sim card (if needed).
Remove SD card and sim card (if needed).
Remove
each of the 7 phillips head screws.
Move
along the outside edge with the plastic tool, popping the connections to the
phone
The
volume rocker and power button housing can be easily lost when you remove the
back housing. Make sure you keep it where you can find it.
Remove
the 2 black phillips head screws located at the top left and the bottom right
of the logic board.
Disconnect
all push connectors and the antenna cable on the left. They detach easily with
a small pull.
Prop
the motherboard on the side of the phone
Remove
the 2 phillips head screws located at the bottom of the charging board
Remove
board by prying off one end and moving toward the other.
A
hair dryer can help loosen the adhesive, but is optional.
Place
the new board where the old board was.
