How to remove the case – How to remove the battery – How to remove the
mother board - LG Spectrum
LG Spectrum
LG Spectrum
Using
your thumbnail, lift up on the notch in the middle of the bottom side of the
phone.
Using
either your thumbnail or a plastic opening tool, lift up on the battery using
the notch in the bottom left hand corner of the battery and remove it from the
phone.
Remove
eleven 4mm Phillips #000 screws with a PH000 screwdriver. Use the magnetic mat
to keep the screws in one place.
Use
the plastic opening tool to firmly pry up the plastic backing around the
perimeter of the phone.
Detach
the black rectangular film attached to the SIM/SD card plate with a plastic
opening tool.
Hook
the plastic opening tool underneath the plate and gently lift it up.
Gently
wiggle the plate side-to-side while pulling up to release it from the metal
clamps holding it in.
Use
the plastic opening tool to lift up the connector that holds the camera to the
board.
Pull
the camera gently out of its housing in the motherboard with your fingers.
Using
the plastic opening tool, gently pry up the audio port connector.
Remove
the audio port from the motherboard with either your hand or the plastic
opening tool.
Detach
the two cable connector wires from the motherboard with the plastic opening
tool. Detach the remaining five connectors from the phone with the plastic
opening tool.
Hook
the plastic opening tool underneath the motherboard and firmly lift it out of
the phone casing.
