How to initialize the blu-ray
disc player
to put the program back at the factory-default, initialize the bd player as the following procedure.
note:
# by initializing, network is reset to disconnected state and “network service disclaimer” appears on the screen.
# once the unit is initialized, the unit starts from initialization the next time it is turned on. the initialization allows quick set up of language and network settings. to exit this mode, select “cancel” on the screen.
1. turn the power on.
2. remove the disc on the tray and close the tray.
3. press [skip up], [1], [2], and [3] buttons on the remote control unit in this order
to put the program back at the factory-default, initialize the bd player as the following procedure.
note:
# by initializing, network is reset to disconnected state and “network service disclaimer” appears on the screen.
# once the unit is initialized, the unit starts from initialization the next time it is turned on. the initialization allows quick set up of language and network settings. to exit this mode, select “cancel” on the screen.
1. turn the power on.
2. remove the disc on the tray and close the tray.
3. press [skip up], [1], [2], and [3] buttons on the remote control unit in this order
4. press [ stop ] button on the
remote control unit.
5. after initializing, the power will turn off automatically.
5. after initializing, the power will turn off automatically.
Firmware renewal mode
1. turn the power on and remove
the disc on the tray and close the tray.
2. press [skip up], [6], [5], and [4] buttons on the remote control unit in this order.
2. press [skip up], [6], [5], and [4] buttons on the remote control unit in this order.
3. select “disc” or “usb” or “sd
card” and press [ok] button on the remote control unit.
4. insert the disc or usb memory stick or sd card for version up.
5. the bd player enters the f/w version up mode automatically. make sure to insert the proper f/w for the state of this model.
4. insert the disc or usb memory stick or sd card for version up.
5. the bd player enters the f/w version up mode automatically. make sure to insert the proper f/w for the state of this model.
6. after the update, the power
will turn off automatically.
7. the power turns back on automatically. remove the disc or usb memory stick or sd card from the unit.
Note: all the settings will be put back to factory default.
the following usb memory stick/sd card can be used for software update. make sure to use a device that has enough space.
# usb memory stick (fat16/fat32 file system)
# sd/mini sd/micro sd card (fat12/fat16 file system)
# sdhc/mini sdhc/micro sdhc card (fat32 file system)
7. the power turns back on automatically. remove the disc or usb memory stick or sd card from the unit.
Note: all the settings will be put back to factory default.
the following usb memory stick/sd card can be used for software update. make sure to use a device that has enough space.
# usb memory stick (fat16/fat32 file system)
# sd/mini sd/micro sd card (fat12/fat16 file system)
# sdhc/mini sdhc/micro sdhc card (fat32 file system)
how to verify the firmware
version
1. turn the power on.
2. remove the disc on the tray and close the tray.
3. press [skip up], [1], [2], and [3] buttons on the remote control unit in this order.
1. turn the power on.
2. remove the disc on the tray and close the tray.
3. press [skip up], [1], [2], and [3] buttons on the remote control unit in this order.
4. to exit this mode, press [
stop ] button.
Network update
1. press [home] button to display setup menu.
2. select settings - others - software update - network.
3. when “yes” is chosen, the [network connecting ] screen appears and the unit starts connecting to the network.
1. press [home] button to display setup menu.
2. select settings - others - software update - network.
3. when “yes” is chosen, the [network connecting ] screen appears and the unit starts connecting to the network.
4. the firmware version
confirmation screen will appear on the screen. select “yes” and press
[ok] button.
5. firmware downloading starts.
6. upon completion of downloading, “download has been completed” will appear on the screen. press [ok] button.
6. upon completion of downloading, “download has been completed” will appear on the screen. press [ok] button.
7. the unit starts reading the
firmware.
8. updating starts automatically.
9. the power turns off
automatically.
10. the power turns back on automatically.
10. the power turns back on automatically.
How to eject disc
when a disc cannot be removed due to malfunction or when an unplayable disc is inserted, follow the procedure below to remove the disc.
Procedure a
1. unplug the ac adapter and then plug it in.
2. turn the power on by pressing the [ eject ] button and the disc will be ejected automatically.
Procedure b
1. remove the front assembly.
2. while pressing the portion a down, slide the portion b in the direction of the arrow as shown below to eject the disc.
when a disc cannot be removed due to malfunction or when an unplayable disc is inserted, follow the procedure below to remove the disc.
Procedure a
1. unplug the ac adapter and then plug it in.
2. turn the power on by pressing the [ eject ] button and the disc will be ejected automatically.
Procedure b
1. remove the front assembly.
2. while pressing the portion a down, slide the portion b in the direction of the arrow as shown below to eject the disc.
