How to update the firmware – Samsung Blu-ray player BD P4600, BD P4610 – deck adjustment procedure

Samsung BD-P4600 - BD-P4610 - deck adjustment – Firmware update – Touch key sensitivity adjustment

Recover Touch-Key Sensitivity

When assemble after disassembly, press number 86824 using remote control.

It means adjustment of the touch-key’s sensitivity to optimize in the current environment.

1 : Open tray mode.

2 : Press number 86824 using remote control.

3 : Verify the message on front display then automatically close tray.

4 : Press the ENTER button to complete.

Deck Adjustment

When assemble after disassembly, press number 235878 using remote control It means the function to reset pick-up condition through auto adjustment of loader.

 1 : No disc mode.

 2 : Press number 235878 using remote control.

 3 : Verify the message ‘Adjusting’ on screen.

 4 : Open tray. And then, insert single sided Blu-ray Disc.

 5 : After playback, insert single sided DVD disc.

 6 : Eject disc after playback then complete.

Verification of Deck Adjustment information
Press button 235879 using remote control.
And then, you can see this message.

Cold Start Method (initialize setup)

This is useful for forgotten Parental Lock password.

Press Next on the front panel for over 5 seconds while 'no disc' status.

VFD sign : RESET

How to check Firmware version
Method 1
 1 : open the tray.
 2 : press and hold INFO button on the remote over 5 seconds.
Method 2
Press 'MENU' on the remote controller.
Setup – System Setup – System Information.
Front : Front Micom F/W
S/W : Blu-ray Disc, DVD, CD, Main (Uneatable)
Loader : Loader F/W (Uneatable)
Region : BD region code / DVD region code.

Update methods

USB Update

The file type of firmware is RUF.

If the firmware file is compressed ZIP or RAR the file should be uncompressed to RUF file.

CD Update

The file type of firmware is ISO.

If the firmware file is compressed ZIP or RAR the file should be uncompressed to CD image file ISO.

Firmware  Update Method by USB flash drive

How to prepare F/W Update file via USB flash drive

If the firmware file is compressed , the file should be uncompressed to RUF file. 

Connect a USB flash drive to your computer.

If there are previous versions of RUF file on USB flash drive, delete them.

Copy the new RUF file to USB flash drive.

How to upgrade the BD-P1600

Remove any Disc, the display should read "No Disc."

Insert USB flash drive into the USB Host jack.

Please wait while verifying.

After sometime, you will see "Yes/No" menu.

Press the 'Enter' button to choose 'Yes' if the version is a later version than the current one.

Wait about 2 to 3 minutes.
When finished, the power will turn off automatically.

Remove the USB flash drive.

Firmware  Update Method by CD
How to make an upgrade CD
If the firmware file is compressed ZIP, the file should be uncompressed to CD image file ISO.
Please burn the CD image file on a blank CD-R/RW disc.
How to upgrade the BD-P1600
Insert the update CD and close the tray.
Please wait while verifying.

After a while, the tray will open and you will see 'Yes/No' menu.
Press 'Enter' button to choose 'Yes' if the update CD you inserted is a later version than the current one.

Remove the update CD from the Disc Tray.
Wait about 2 to 3 minutes.
When finished, the power will turn off automatically.