How to program a GE remote control
* Remove
the battery cover and batteries from the GE Universal Remote Control. Look
for a sticker that says the model number of the remote control. Identify the
version number, indicated by “V2,” “V3” or “V4.” If no V-number is listed, then
just assume it is version 1.
* Turn
on the device you are programming in to the GE Universal Remote.
* Press
down the “Setup” button for 5 seconds until the red indicator light turns on.
* Press
the device button, such as “TV,” “DVD,” or “AUX.”
* Enter
the 3 or 4 digit code. Once you enter a valid code the light turns off.
* Press
the “Power” button to test to see if it worked. If not keep repeating the steps
until you find a code that works.
How
to Program any Philips Universal Remote Control.
1. Turn
on the device you wish to program to operate with the Philips Universal Remote
Control.
2. Hold
down the “Code Search” button on the remote control. Release the button after
the red indicator light blinks.
3. Press
the device button, such as “TV” “CLB” “VCR” or “SAT” This will make the
indicator light blink off and then back on.
4. Keep
pressing the “CHAN +” button until the device changes channels. When the TV
changes channels again, stop.
5. Press
the “Mute” button to save the code in memory.
How
to Program any RCA Universal Remote Control.
Find
codes for each device and brand.
Press
and “HOLD” CODE SEARCH.
Press
and release the TV or VCR button you want to set up. When the selected device
button blinks go to the next step.
Next
enter the 3 digit code from the TV, VCR or Cable Box remote code list.
Release
CODE SEARCH.
With
the device on press VOLUME UP to see if the tv responds.
If
the TV or other does not respond then simply repeat steps 1-5 using another
code number
