How to disassemble Samsung VC8714C3B-XEC Vacuum Cleaner

Disassembly of CASE-CYCLONE ASSY

Pull out CASE-CYCLONE ASSY From the body of VACUUM CLEANER.

Detach COVER-CYCLONE ASSY from CASE ASSY.

Remove CAP-COVER CYCLONE, HOLDER-SPONGE ASSY and FILTER CYCLONE from COVER-CYCLONE.

Remove GRILLE-HEPA ASSY and BRUSH-CYCLONE ASSY from CASE ASSY.
Remove HANDLE-CYCLONE UP from CASE-ASSY and then, remove 2 screws, using (+) screwdriver to remove HANDLE-CYCLONE LOW.

Disassembly of BODY-MID ASSY

Detach BUTTON-SWITCH and BUTTON-C/REEL with a fiat head screw driver.

Remove GRILLE-BACK and MICRO FILTER from the body of VACUUM CLEANER.
Using sharp metal, remove CAP-SCREW (4pcs) and then, loosen 6 screws and detach BODY-MID.

Remove HANDLE ASSY, HOLDER-HANDLE, DUCT-OUTLET and PANEL-CONTROL ASSY from BODY MID.

Disassembly of PBA MAIN

Remove the connector-wires from PBA MAIN.
Loosen 1 screw and remove PBA-MAIN.
Loosen 1 screw and remove PBA-LAMP.

Disassembly of BASE-UP ASSY

Remove CAP-AIR, SEAL-OUTLET, DAMPER-ASSY and SWITCH-PRESSURE from the BODY BASE-UP

Loosen 2 screws and detach DUST-INLET.
To remove DUCT-CYCLONE and SEAL-DUST, remove 5 screws.

Loosen 7 screws and detach BODY BASE-UP.

Disassembly of BODY-BASE ASSY

Remove BAND-BODY, COIL-HARMONIC, COVER-BASE and GRILLE FILTER ASSY from BODY-BASE.

Disassembly of MOTOR

Separate MOTOR from BODY-BASE.
Separate SUPPORT-MOTOR ASSY, SPONGE MOTOR and CUSHION-MOTOR F from MOTOR FAN AC.
Separate the W/HARNESS-MOTOR from MOTOR-FAN AC.

Disassembly of CORD REEL ASSY

Detach GUARD-CORD With a fiat head screw driver.

Separate CORD-REEL ASSY.
Remove LEVER-BRAKE ASSY from BODY-BASE

Assembly of CORD-REEL ASSY

Hold COVER-REEL and wind the power cord 4~5times.
When winding is completed, reassemble CORD-REEL ASSY immediately into the body.