How to disassemble Panasonic Multi-styling Straightener EH-HW1, EH-HW32, EH-HW51

* Remove Shaft Cover from Main Body by Slotted screwdriver (Minus driver).

* Remove Torx screws at Shaft position by Phillips screwdriver (Plus driver).

* Push Shaft out by tiny-shaped Phillips screwdrivers (Plus driver) and pull it out from the main body.

* Remove Pivot spring by gripping and pulling it out from the Main body.

* Remove 6 Screws for fitting Press plate side by Phillips screwdrivers (Plus driver).

* Press plate cover at the Hook part by Slotted screwdriver (Minus driver).

* Remove Lock Button and Lock Button Spring.

* Remove Iron Plate of Heater B from Hook

* Remove Slide Plate and Slide Spring.

* Take off Press Plate.

* Remove 2 Screws of the Housing side by Phillips screwdriver (Plus driver).

* Remove 6 Screws by Phillips screwdriver (Plus driver).

* Remove Housing A from Housing B in Grip Case as following the drawing.

* Take off Iron Plate and Circuit assembly b/k from Housing B.