How to Disassemble LG Bread maker HB-151JE

To protect against electrical shock, do not immerse cord, plug, or appliance in water or other liquid.
Do not touch hot surfaces. Always use oven mitts when handling the hot bread pan of bread.
Close supervision is necessary when the appliance is used by or near children.
Unplug the unit from the outlet when not in use and before cleaning. Allow the bread maker to cool before attaching or removing parts.
Do not touch moving parts.
Do not operate the appliance with a damaged cord or plug or after the appliance malfunctions, or it has been dropped or damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or mechanical adjustment.
Attachments that are not recommended or sold by the appliance manufacturer should not be used.
Do not use outdoors.
Do not let the cord hang over the edge of the table or counter or touch hot surfaces.
Do not place on or near a gas or electric burner, or in a heated oven.
To disconnect, grip the plug and pull it out from the wall outlet. Never pull the cord.
Do not use the appliance for other than the intended use.
This product is intended for household use only.

Before servicing, you should keep your hands dry. The power cord must be unplugged to protect electrical hazards.
Wear gloves when assembling or disassembling the appliance to avoid being injured by a sharp edge.

Place the bread maker allowing at least 4-inch air space around sides and top of the bread maker.
Always place the bread maker on a heat-proof counter top or table during operation.
This bread maker must be placed on a firm, flat, and solid surface.
120V/60Hz rated Bread Machine has a polarized plug : one blade is wider than the other.  230V/50Hz rated Bread Machine has to be earthed.

The marked electrical rating of the extension cord should be at least as great as the appliance.

The longer cord should be arranged so it will not drape over the counter top or tabletop where it can be pulled by children or tripped over.
EXPLODED VIEW

HOW TO DISASSEMBLE

Turn the Top Cover assembly upside down and pull out the inner cover and the viewing window.

Pull out the control panel.

After disconnecting leads, remove the oven case main assembly from the chassis by unscrewing two machine screws fixing oven case main assembly.

Remove the lead wire assembly and sheath heater assembly from the oven case main assembly.

Turn the bread maker upside down. Remove four legs and base cover by unscrewing. Pull out the power cord assembly on the bottom of the unit. Remove the chassis assembly from the out case.

Remove the poly V-belt.
Remove nut and pulley washer, then kneading pulley can be disconnected.
Remove the E-ring, washer, and pulley shaft assembly.

Remove the motor pulley from the motor shaft by removing one machine screw. Remove three fixing screws, then the kneading motor and motor cushion can be disassembled.

Turn the chassis upside down and remove the oven base and the capacitor.

When you reassemble the kneading pulley, poly V-belt, and motor pulley after service or repair; adjust the centre of the kneading pulley, poly V-belt, and motor pulley as follows.