Samsung
galaxy tab disassembling procedure – How to disassemble Samsung Galaxy Tab 10.1
– how to remove the battery – how to remove the main board – How to remove the
Rear cover
Samsung Galaxy
Tab 10.1: dissembling procedure
How to remove Rear Panel
Place
the bottom of the tablet towards you.
Remove the two 4.1 mm screws near the charge port with a Tri-Wing screwdriver.
Remove the two 4.1 mm screws near the charge port with a Tri-Wing screwdriver.
Start
in the middle of the left side and insert a plastic opening tool between the
rear panel and the front panel assembly.
Carefully run the plastic opening tool along the left and top edge to pry the rear panel away from the rest of the device.
Place opening picks along the side you have already pried open to keep the back panel detached from the rest of the device.
Be sure to work carefully, as prying too firmly can crack the screen.
Carefully run the plastic opening tool along the left and top edge to pry the rear panel away from the rest of the device.
Place opening picks along the side you have already pried open to keep the back panel detached from the rest of the device.
Be sure to work carefully, as prying too firmly can crack the screen.
Using
the plastic opening tools, continue to carefully run along the right and bottom
edge, and then lift the screen from the back panel.
How to remove Battery
Flip
up the retaining flaps on the ZIF connectors that secure the three large ribbon
cables.
Carefully pull the three ribbon cables from their sockets on the motherboard.
Carefully pull the three ribbon cables from their sockets on the motherboard.
Remove
the ten 3 mm Phillips #00 screws surrounding the battery.
Lift
the edge of the battery up with your finger or a spudger.
Detach
the battery by holding the motherboard down while gently lifting the battery
up.
How to remove Volume and Power Button
Hold
down the motherboard with your finger and use a plastic spudger to gently pry
up the connection for the volume keys and power key.
How to remove Flash and Rear Camera Connection
Use
the spudger to pry up on the flash connection (black connection).
Do the same for the rear camera connection (white connection).
Do the same for the rear camera connection (white connection).
How
to remove Front Camera, Micro SD card/headphone Connection
Use
the spudger to pry up the front camera connection (orange connection).
Do the same for the Micro SD card/headphone jack connection (blue connection).
Do the same for the Micro SD card/headphone jack connection (blue connection).
How to remove Speakers and Antenna Connection
Use
the spudger to pry up on the left and right speaker connections (orange
connections).
Do the same for the antenna wire.
Do the same for the antenna wire.
How to remove the Motherboard
Use
your finger to lift up the bottom of the motherboard and then pull the board
up.
