Tuesday 17 January 2017

How to upgrade the software (Firmware) - Xoceco LCD TV

In most cases, a software update might be necessary for most of the TV TV sets. Picture distortion, picture freezing, audio distortion, improper tuning and so many problems can be rectified by upgrading with the latest software available to that brand TV.  Given here is the firmware upgrade procedure of Xoceco LCD TVs.  The procedure is similar to Dynex LCD TVs too.  Both  these brands are Chinese.
Software Update
This series’ TV chassis provides two software upgrade ports, one is SERVICE PORT, the other is RS232 jack. To use SERVICE PORT, only a USB device is required and the speed is faster, so it is recommended to use the SERVICE PORT. To use RS232 jack, the speed is slower, and more devices are required such as a PC, a set of fixture for upgrade and upgrade software. It is recommended that only SERVICE PORT fails in upgrade, then use RS232 jack.
Making use of SERVICE PORT for upgrade
Copy file with extension name of BIN (*.BIN) for upgrade to the USB device, save it at root catalog. To upgrade different TV model, the adopted files are different. It is required to correctly name the *.BIN files, and below table lists the TV models and file names for your reference.
Method 1
1. Disconnect the AC power, insert USB device into the SERVICE PORT.
2. Reconnect the power, the TV will automatically upgrade the software. It will take some minutes.  During the process, the power indicator will flicker in red and blue. After completion, the TV will auto power on and the power indicator lights blue. If the process takes more than 5 minutes, that means the upgrade fails. Please check the BIN format file and USB device again.
3
When upgrade completed, remove the USB device, disconnect the AC power and then reconnect the power. The SERVICE PORT upgrade is finished completely.
Method 2
1. Connect the power. Insert the USB device into the SERVICE PORT.
2. Enter into Factory menu, access SW Upgrade option. The TV will automatically scan the USB device and files in BIN format. If USB device is normal and BIN file is correct, the TV will upgrade by itself. If fails, then check BIN file and USB device again.
3. When upgrade completed, remove the USB device, disconnect the AC power and then reconnect the power. The SERVICE PORT upgrade is finished completely.

Making use of RS232 for upgrade
A PC and the upgrade fixture designed for this KS  chassis are required. Use Mstar on-line writing tool – Mstar ISP Utility, the needed time is longer.

1. Power on the TV, connect the upgrade fixture correctly, open the upgrade software, click “Connect” icon. If the connection fails, Click “Config” icon . Adjust “ I2C Speed Setting” option, lower the setting of “Speed”. Then click “Connect” icon again.
Wait until right connection information appears.
Click “OK” , then click “Device”

Mark “WP Pin pull to high during ISP” option.
Mark “New Setting Below” option.
Mark Bit7,
Bit5,Bit4, Bit3, Bit2 from “Status Register” option. That is, the value of “Register Setting Value” should be “BC”.
4. Click “Read” icon, download upgrade software which is shown below.
Mark “WP Pin pull to high during ISP” option.
Mark “New Setting Below” option.
Mark Bit7, Bit5, Bit4, Bit3, Bit2 from “Status Register” option. That is, the value of “Register Setting Value” should be “BC”.
4. Click “Read” icon, download upgrade software
5. Click “Auto” .
Mark “Erase Device” option, select “File Area”.
Mark “Blank”, “Program”, “Verify”, “Exit ISP” options.
Click “Run” button, on the right will appear information of upgrade hints. When “Pass” appears, that means the upgrade is successful.
6. After completion, disconnect the power then reconnect it. The upgrade is finished now.

LG 32LK610BPUA, LG 32LK610BBUA LCD TVs – How to upgrade the software, fault checking method

  Software update procedure USB (1) Insert the USB memory Stick to the USB port (2) Automatically detect the SW Version and show the bel...