Tuesday, 15 June 2021

How To Program Spectrum Remote control To Cable Box

 

Step 1. Ensure you turn on your Cable box.

Step 2. Hold your Arris remote to face your Cable box.

Step 3. Press and hold the ‘CBL’ button on your remote for a couple of seconds. The CBL button is the Component button for Cable Box on your remote. Release the button when the tiny LED light on the Component button turns on.

Step 4. Enter the correct code for your Cable box brand. The remote codes have been listed earlier on this article.

Step 5. Press the Power button. If your device goes off, it means you got the correct code. If not, try the next code. You can also try with the Volume buttons.

Step 6. Finally, save the codes by pressing the Component button again. That is, press the ‘CBL’ button again until the tiny LED button blinks twice to show that your codes have been saved.

How to program spectrum remote control to Arris cable box

Arris Cable Box Universal remote codes (5 Digits)

  • 52187
  • 51982
  • 51376
  • 52378
  • 51998
  • 42384
  • 42717
  • 45832

Arris Cable Box Remote control codes (4 Digits)

  • 1585
  • 1998
  • 5097
  • 2437
  • 1982
  • 3723
  • 0858
  • 1274
  • 5131
  • 0476
  • 1376
  • 2952
  • 5537
  • 2187
  • 2378

Remote control codes for Arris Cable Box (3 Digits)

  • 134
  • 132
  • 176
  • 198
  • 245
  • 287
  • 217
  • 219



No comments:

LG 32LK610BPUA, LG 32LK610BBUA LCD TVs – How to upgrade the software, fault checking method

  Software update procedure USB (1) Insert the USB memory Stick to the USB port (2) Automatically detect the SW Version and show the bel...