HP Pro Slate 10 EE G1
DISASSEMBLING
PROCEDURE
How
to remove Back cover
Before disassembling the
tablet, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
Remove the back cover:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
Remove the back cover:
1. Place
the tablet on a flat surface, display panel side down, with the docking
connector toward you.
2. Open the I/O cover (1).
3. Remove the screw cover (2).
4. Remove the Torx5 TM2.0×4.7 screw (3) that secures the back cover to the display panel assembly.
2. Open the I/O cover (1).
3. Remove the screw cover (2).
4. Remove the Torx5 TM2.0×4.7 screw (3) that secures the back cover to the display panel assembly.
5. Use
the notch (4) inside
the I/O area to release the back cover (5).
How
to remove Battery
Before removing the
battery, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover
Remove the battery:
1. Disconnect
the battery cable (1) from
the system board.
2. Detach the battery (2) from the display panel assembly. (The battery is attached to the display panel assembly with double-sided adhesive.)
2. Detach the battery (2) from the display panel assembly. (The battery is attached to the display panel assembly with double-sided adhesive.)
How
to remove WWAN module
Before removing the WWAN
module, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover
Remove the WWAN module:
1. Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module.
1. Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module.
2. Remove
the Phillips PM2.0×4.1 screw (2) that
secures the WWAN module to the system board. (The WWAN module tilts up.)
3. Remove the WWAN module (3) by pulling the module away from the slot at an angle.
3. Remove the WWAN module (3) by pulling the module away from the slot at an angle.
4. Remove the WWAN
module
How
to remove Rear-facing webcam
Before removing the
rear-facing webcam, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover
5. Disconnect the battery cable from the system board
Remove the rear-facing webcam:
1. Release the zero insertion force (ZIF) connector (1) to which the rear-facing webcam cable is attached, and then disconnect the rear-facing webcam cable from the system board.
2. Release the rear-facing webcam (2) from the molding built into the display panel assembly.
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover
5. Disconnect the battery cable from the system board
Remove the rear-facing webcam:
1. Release the zero insertion force (ZIF) connector (1) to which the rear-facing webcam cable is attached, and then disconnect the rear-facing webcam cable from the system board.
2. Release the rear-facing webcam (2) from the molding built into the display panel assembly.
3. Remove the
rear-facing webcam and cable.
How
to remove Wireless antenna
Before removing the
wireless antenna, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover
5. Disconnect the battery cable from the system board
Remove the wireless antenna:
1. Disconnect the WWAN auxiliary antenna cable (1) from the WWAN module auxiliary terminal.
2. Release the WWAN auxiliary antenna cable from the retention clips (2) built into the display panel assembly.
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover
5. Disconnect the battery cable from the system board
Remove the wireless antenna:
1. Disconnect the WWAN auxiliary antenna cable (1) from the WWAN module auxiliary terminal.
2. Release the WWAN auxiliary antenna cable from the retention clips (2) built into the display panel assembly.
3. Detach
the WWAN auxiliary antenna transceiver (3) from the display panel assembly. (The WWAN auxiliary
antenna transceiver is attached to the display panel assembly with double-sided
adhesive.)
4. Remove the WWAN
auxiliary antenna cable and transceiver.
5. Disconnect
the WWAN main antenna cable (1) from
the WWAN module main terminal.
6. Release the WWAN main antenna cable from the retention clips (2) built into the display panel assembly.
6. Release the WWAN main antenna cable from the retention clips (2) built into the display panel assembly.
7. Detach
the WWAN main antenna transceiver (3) from
the display panel assembly. (The WWAN main antenna transceiver is attached to
the display panel assembly with double-sided adhesive.)
8. Remove the WWAN main
antenna cable and transceiver.
9. Disconnect
the WLAN main antenna cable (1) from
the WLAN module main terminal.
10. Release the WLAN main antenna cable from the retention clips (2) built into the display panel assembly.
10. Release the WLAN main antenna cable from the retention clips (2) built into the display panel assembly.
11. Detach
the WLAN main antenna transceiver (3) from
the display panel assembly. (The WLAN main antenna transceiver is attached to
the display panel assembly with double-sided adhesive.)
12. Remove the WLAN main
antenna cable and transceiver.
13. Disconnect
the WLAN auxiliary antenna cable (1) from
the WLAN module auxiliary terminal.
14. Detach the WLAN auxiliary
antenna transceiver (2) from
the display panel assembly. (The WLAN auxiliary antenna transceiver is attached
to the display panel assembly with double-sided adhesive.)
