Child Lock
Child lock is used in order to protect the washing cycle from the effects of unwanted button activation during the cycle. Child lock is activated by pressing the first and third button
on the control panel at the same time for more than 3 sec. When child the lock is activated, LED’s on the function buttons blink to indicate that child lock is active. In order to deactivate child lock, the same buttons (1st and 3rd) should be pressed again for more than 3 seconds.
Deactivation of child lock is shown by blinking of LED on Start/Pause button.
Child lock is used in order to protect the washing cycle from the effects of unwanted button activation during the cycle. Child lock is activated by pressing the first and third button
on the control panel at the same time for more than 3 sec. When child the lock is activated, LED’s on the function buttons blink to indicate that child lock is active. In order to deactivate child lock, the same buttons (1st and 3rd) should be pressed again for more than 3 seconds.
Deactivation of child lock is shown by blinking of LED on Start/Pause button.
Pump filter
The pump filter system elongates the life of your pump, which is used to drain the dirty water. It prevents lint to enter the pump. Cleaning of your pump filter in every 2-3 months is
recommended. To clean your pump filter:
Open the kick-plate's cover, by pulling the handle.
Before opening the filter cover, place a cup in front of the filter cover to prevent flow of the remaining water in the machine.
Loosen the filter cover by rotating it counter clockwise and drain the water.
Remove the foreign materials from the filter.
Check for the rotation of the pump manually.
After you have cleaned the pump, fit the filter cover by rotating clockwise.
Put the kick-plate cover into place.
Do not forget that if you do not fit in the filter cover properly, it will leak water.
The pump filter system elongates the life of your pump, which is used to drain the dirty water. It prevents lint to enter the pump. Cleaning of your pump filter in every 2-3 months is
recommended. To clean your pump filter:
Open the kick-plate's cover, by pulling the handle.
Before opening the filter cover, place a cup in front of the filter cover to prevent flow of the remaining water in the machine.
Loosen the filter cover by rotating it counter clockwise and drain the water.
Remove the foreign materials from the filter.
Check for the rotation of the pump manually.
After you have cleaned the pump, fit the filter cover by rotating clockwise.
Put the kick-plate cover into place.
Do not forget that if you do not fit in the filter cover properly, it will leak water.
Detergent drawer
Detergents may form sediments in your detergent drawer or in the housing of the detergent drawer over time. To clean the sediment, pull out the detergent drawer from time to time. To pull out the detergent drawer:
Pull the detergent drawer to the end.
Keep pulling by pressing on the siphon lid inside the drawer pulled to its end, and remove the drawer from its place.
Wash with an old toothbrush and copious amount of water.
Remove the leftover disused detergent, avoid dropping it back in to the machine.
After drying the detergent drawer, replace it in the housing by reversing the removal operations.
Siphon plug
Pull out the detergent drawer. Remove the siphon plug and clean the residues of the softener thoroughly. Fit the cleaned siphon plug in its location. Check it is placed properly.
Pull out the detergent drawer. Remove the siphon plug and clean the residues of the softener thoroughly. Fit the cleaned siphon plug in its location. Check it is placed properly.
Cabinet
Clean the exterior surface of the cabinet of your machine with lukewarm water and a cleaning substance that will not damage the cabinet. After rinsing with clean water, wipe it with a soft and dry cloth.
Clean the exterior surface of the cabinet of your machine with lukewarm water and a cleaning substance that will not damage the cabinet. After rinsing with clean water, wipe it with a soft and dry cloth.
